Corporate Office: P.O. Box 21121, Eugene, OR 97402
oregonfuelinjection.com
EUGENE MEDFORD
Priming and Starting
1. Loosen fuel return line (A).
2. Unscrew hand primer (B) on fuel supply pump until it can be pulled by
hand.
3. Operate the hand primer until fuel flow is free from air bubbles.
4. Simultaneously stroke the hand primer down and close the fuel return
port. This prevents air from entering the system. Tighten securely.
5. Lock hand primer in position.
6. Connect throttle levers and adjust for full travel as required.
7. Crank the engine to start.
8. If the engine will not start, loosen the injection lines at the injectors, one
line at a time. Crank the engine over until fuel free of bubbles flows from
the injector, tighten the injection line.
Use two open ended wrenches if needed.
4036 West 1
st
Ave.
Eugene, OR 97402
(541) 485-1434 • 1-800-452-5055
2221 Tower East Dr
Medford, OR 97504
(541) 773-8669 • 1-800-648-8848
10/10/12
