Productos de la Marca Blomberg

24 / English

Front-Loading Automatic Washer-Dryer

Installation Instructions

Drainage

WARNING

• Drain hose should not be bent. Be sure that there are no kinks or

cuts on it.

• Drain hose outlet must not contact the drained water.

Drain hose may be connected into a sink, into the drain of a sink, to a

standpipe and floor drain.

• Whenconnectingintoasink,thedrainhoseshouldbeplacedatthe

edge of the sink and secured with the hose guide supplied by the

manufacturer. Additionally, the guided hose may be tied to the water

faucet with a strap for extra security.

• Drainhosemaybeconnectedintothedrainofasink.Besurethat

the connection is safe and not leaking. An additional clip etc can be

used for safe connection.

• Drainhosemayalsobeconnectedtoaminimum1.26in(32mm)

diameter stand pipe.

• Besuretosecurethedrainhosetightlytothepipe(standpipe,

drain pipe/edge of the sink) with a strap etc.

• Thehoseshouldbeplacedbetween16and39in.(40and100cm)

from the floor level

• Ifyouhavefloordrainsystem,youcanplacethedrainhoseinthe

hole located on the floor.