Productos de la Marca Blomberg

Owner’s Guide & Installation Instructions

21 / English

Installation Instructions

Power supply and circuit

Important:

• Wallpowerconnectionshouldcomplywithnationalregulations.

• Thewiringfortheelectricaloutletcircuitmustbesufficienttomeet

theappliancerequirements.UseofaGroudFaultCircuitInterrupter

(GFCI)isrecommended.

• Thevoltageandmaximumtotalcurrentarespecifiedinthesection

“Specifications”.

• Theappliancemustnotbedirectlyconnectedtothewallpowerin

case of absence of junction box.

• Connectionviaextensioncordsormulti-plugsshouldnotbemade.

WARNING

• A damaged power cable must be replaced by a qualified

electrician.

• The appliance must not be operated unless it is repaired! There

is the risk of electric shock!

15 Amp. Fuse or circuit breaker, 208-240 volt, 60 Hz, grounded,

alternating current

Properlygrounded4-prongreceptacleistobelocatedsothepower

supply cord is accessible when the product is in installed position.

(A) After the shipping bolts hole covers are

fitted in the holes, the power supply hole cover

(supplied in the bag with the owner’ guide) has

to be fitted to the hole.