Productos de la Marca Asko

INTRODUCTIONINTRODUCTION

INTRODUCTION

You have in your hand the ASKO Service Manual

for our new generation of washing machines that

are friendly to the environment in both their

manufacture and their use.

This new generation of washing machines has been

designed for ease of servicing. By this we mean that

it’s a simple job, for example, to replace a damaged

side panel. That’s why we’ve changed the design

from a one-piece casing to a split casing.

To secure parts, we have replaced many of the screws

by plastic snap fasteners. We have also designed the

machines so that you can perform as much servicing

as possible from the front, all for simplifying service.

We have also integrated service aids, such as hooks

to hang parts on, i.e., the glass door, so that you can

use both hands for installation.

We hope this Service Manual will be a positive tool

in your daily work. If you have any questions

concerning servicing ASKO products, to contact the

ASKO Advisory Center at:

1161 Executive Drive West

Richardson, Texas 75081

972-238-0846

THE DIFFERENT MODELSTHE DIFFERENT MODELS

THE DIFFERENT MODELS

The table below shows the Model numbers and the

correlating model type:

Model Type

W600 WM 33 (600–1000 rpm)

W620 WM 44 (600–1200 rpm)

W640 WM 55 (600–1400 rpm)

W660 WM 55 (600–1600 rpm)

W600 and W620 are mechanical, programmer-

controlled washing machines. W640 and W660 are

electronically-controlled washing machines.

The W620 has a five-hour delay start feature. The

W640 and W660 can be set to delay starting the

washing program for up to 12 hours. On the W640

and W660 you can choose from eleven different

languages on the display, and you can program them

to display the temperature in Celsius or Fahrenheit.

NOTE:

It is important that you put the Model Number on

all NARDA claim forms to expedite your payment.

INTRODUCTION AND SAFETY REGULATIONS

SAFETY REGULASAFETY REGULA

SAFETY REGULA

TIONSTIONS

TIONS

GENERALGENERAL

GENERAL

The electrical and plumbing installations should be

carried out by a qualified electrician and plumber.

Be sure to follow all/any Federal, State, County,

City or Local codes in your area.

WARNINGWARNING

WARNING

Always switch off the main electrical power supply

when dismantling and assembling the washing

machine.

WARNINGWARNING

WARNING

Always use a grounded EMC wristband when

working with electrical components, such as panel

and program control printed circuit boards.

TRANSPORT/WINTER STORAGETRANSPORT/WINTER STORAGE

TRANSPORT/WINTER STORAGE

If the machine is to be transported or stored for the

winter in unheated premises, empty the pin trap

and drain pump of water. (See "Cleaning and

Maintenance" on page 55.)

DISPOSALDISPOSAL

DISPOSAL

When the machine comes to end of its useful life

and is to be scrapped, it must be immediately

rendered unusable.

The machine is manufactured and labelled for

recycling. Contact your local refuge authority to find

out how the machine should be scrapped and

recycled properly. This number is normally found

in the “City of” numbers provided in your

telephone book.

WARNINGWARNING

WARNING

To prevent children from being accidentally

locked in the tub, the locking washer door must

be removed when discarding the washer.