Adjusting the dosage of rinse aid
M
A
X
1
2
3
4
+
The rinse aid dial is
set at the factory at
position 3.
To increase or de-
crease the dosage
refer to 'What to do
if...'
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for
household utensils that are applicable for
dishwashers.
Do not use the appliance to clean objects that
can absorb water (sponges, household cloths,
etc.).
• Before you load cutlery and dishes, do these
steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these
steps:
– Load hollow items (e.g. cups, glasses and
pans) with the opening down.
– Make sure that water does not collect in
the container or in a deep base.
– Make sure that cutlery and dishes do not
lie inside one another.
– Make sure that cutlery and dishes do not
cover other cutlery and dishes.
– Make sure that glasses do not touch other
glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coat-
ings can keep water droplets. Plastic items
do not dry as well as porcelain and steel
items.
• Put light items in the upper basket. Make
sure that the items do not move.
Caution! Make sure that the spray arms
can move freely before you start a washing
programme.
Warning! Always close the door after you
load or unload the appliance. An open
door can be dangerous.
1
Arrange service
dishes and large lids
around the edge of
the lower basket.
2
1 2
8
www.zanussi.com
