Administrator programming: An introduction IP E-Class Administrator’s Manual
A.
Programming basics
As mentioned earlier, you may program from any IP Feature Phone in the system:
1. Press PROGRAM. The normal station programming menu prompt will begin to play. Press HOLD
to stop the prompt.
2. Enter the Administrator password
1
, followed by #. You are now in programming mode (during this
time, the extension will be automatically placed in DND).
3. Follow the system programming menu to program as you wish; and, when finished, hang up.
Note: The system will automatically exit programming mode after 10 minutes of inactivity.
Example: If your Administrator password is 864, enter programming mode by pressing
PROGRAM HOLD 8 6 4 #
(To exit programming mode, hang up.)
System programming overview
Once you’ve accessed programming mode on an IP Feature Phone, the system will prompt for — and
confirm — each keystroke action via voice commands and the display. You program both configuration
data and recordings in the same manner. The following menu shows Administrator programming func-
tions available on the IP E-Class system:
1 System parameters
13 Administrator password
14 System clock
141 Set time/date
142 Automatic time setting
17 System speed dial
3 Extension programming
32 Extension feature authorization
5 Voice mail programming
53 Guest/info mailboxes
54 Group mailboxes
55 Message notification options
551 Station delivery options
552 Delivery/paging parameters
56 Cascade paging mailboxes
57 Q & A mailboxes
6 Recording
61 Record system prompts
62 Record directory names
63 MOH programming
631 MOH source
632 Record MOH
633 MOH volume
7 Reports
73 ACD department report
74 Voice mail statistics report
75 System speed-dial list
1
Default is 4 5 6.
