The display shows the set time value: for example –
.
• After some seconds the display shows a new time
value:
. The appliance calculates also the du-
ration of the anti-crease and the cooling phases.
• Press Start/Paus to start the programme.
The indicator
comes on.
If you set only 10 minutes of drying, the appliance
performs only a cooling phase.
If the laundry is not sufficient dry, set again a short dry-
ing time.
At the end of the drying programme
• The appliance stops automatically.
• The acoustic signals operate (if they are active).
•
In the display
comes on.
• The indicator of Start/Paus goes off.
• The last minutes of the drying cycle the appliance
performs a cooling and anti-crease phase. The door
is still locked.
•
When the indicator
goes off, you can open the
door.
•
Turn the programme knob to
to deactivate the
appliance.
• Remove the laundry from the appliance. Make sure
that the drum is empty.
• Keep the door ajar, to prevent mildew and odours.
• Close the water tap.
Daily Use - Washing & Drying - NON-STOP programme
The maximum load is 3.5 kg for cottons and linen
and 2 kg for synthetics.
Warning! Do not use a dosing device/ball during
automatic washing and drying programme.
• Load the laundry, one item a time.
• Put the detergent and the additives in the appropriate
compartment.
• Turn the programme dial to the washing programme.
The display shows the indicators of the different
washing phases.
• Set the available options.
• Set the maximum spin speed allowed for the type of
laundry. This helps to obtain the best dryness result.
Washing & Automatic drying
• Press Autotork to set of the dryness levels:
•
: IRON DRY level indicator for cotton items
•
: CUPBOARD DRY level indicator for cotton and
synthetic items
The time value on the display is the duration of the
washing + drying cycles, calculated on a default load
size.
• Press Start/Paus to start the programme.
The indicator
comes on. The display shows reg-
ularly a new time value.
The last minutes of the drying cycle the appliance
performs the anti-crease and the cooling phases.
Washing & Timed Drying
If you press Torktid it is also possible to dry up to
6 of cotton items (refer to “Programmes for timed
drying”).
• Press Torktid to set the drying time value.
• The display shows the set drying value time, for ex-
ample
value.
• After some seconds the display shows the final time
value
, that is the total duration of the
washing and drying cycles (washing + drying + anti-
crease + cooling phases).
If you set 10 minutes of drying only after washing,
the appliance calculates also the duration of the
anti-crease and the cooling phases.
• Press Start/Paus to start the programme.
•
The indicator
comes on. The door is locked.
The display shows regularly a new time value.
At the end of the programme
The appliance stops automatically. The acoustic signals
operate (if they are active).
For more information see ‘At the end of the drying pro-
gramme “ of the previous chapter.
14
