Open the appliance door when the programme
operates:
1.
Turn the programme knob to
to deactivate the
appliance.
2. Wait for some minutes and then open the appli-
ance door.
3. Close the appliance door.
4. Set the programme again.
At the end of the programme
• The appliance stops automatically.
• The acoustic signals operate.
•
In the display
comes on.
• The indicator of Start/Paus goes off.
• The door lock indicator goes off.
1.
Turn the programme knob to
.
2. Remove the laundry from the appliance. Make sure
that the drum is empty.
3. Keep the door ajar, to prevent the mildew and
odours.
4. Close the water tap.
The washing programme is completed, but there is
water in the drum:
– The drum turns regularly to prevent the creases in
the laundry.
– The door lock indicator is on. The door stays locked.
– You must drain the water to open the door.
To drain the water:
1. Set the Tömning or the Centrifugering programme.
2. Press Start/Paus. The appliance drain the water
and spin.
3. When the programme is completed and the door
lock indicator goes off, you can open the door
4.
Turn the programme knob to
to deactivate the
appliance.
Stand-by
Some minutes after the end of the washing programme,
if you do not deactivate the appliance, the energy saving
status activates.
The energy saving status decreases the energy con-
sumption when the appliance is on the stand by.
• All indicators and the display go off.
• The indicator of Start/Paus flashes slowly.
• Press one of the options to deactivate the energy
saving status.
Daily Use - Drying
The maximum load is 3.5 kg for cottons and linen
and 2 kg for synthetics.
If you press Torktid it is also possible to dry up to 5 of
cotton items (refer to “Programmes for timed drying”).
Warning!
Open the water tap. Put the drain hose in the sink or
connect to the drain pipe.
• Load the laundry one item at a time.
• Turn the programme knob to the dryness programme
applicable for the items to dry.
• Set the maximum spin speed allowed for the type of
laundry. This helps to obtain the best dryness result.
You can press Autotork or Torktid.
Drying with Autotork:
• Press Autotork to set of the dryness levels:
–
: IRON DRY level indicator for cotton items
–
: CUPBOARD DRY level indicator for cotton
and synthetic items
• The display shows a time value, calculated on the
default load size. If the amount of your laundry is
more or less than the default size, the appliance ad-
justs automatically the time value during the cycle.
• Press Start/Paus to start the programme.
The indicator
comes on.
You cannot set all dryness levels for any type of
laundry.
Dying with Torktid:
• Press Torktid again and again to set the time value
(see the “Programmes for timed drying” table).
• Each time you press this button the time value in-
creases by 5 minutes.
13
