Consumption values
Programme Energy consumption
(KWh)
Water consumption
(litres)
Programme dura-
tion
(minutes)
Cottons 60° 1.30 50 For the duration of
the programmes,
please refer to the
display on the con-
trol panel.
Cotton Energy Saving Programme 60°
1)
1.19 49
Cottons 40° 0.77 60
Synthetics 40° 0.50 54
Delicates 40° 0.60 63
Wool/ Handwash 30° 0.25 55
1) «Cotton Energy Saving programme » at 60°C with a load of 7 kg is the reference programme for the data entered in the energy
label, in compliance with EEC 92/75 standards.
The consumption data shown on this chart is to be
considered purely indicative, as it may vary de-
pending on the quantity and type of laundry, on the inlet
water temperature and on the ambient temperature.
Before first use
1. Put 2 litre of water in the detergent compartment
for washing phase. This activates the drain system.
2. Put a small quantity of detergent in the compart-
ment for washing phase.
3. Set and start a programme for cotton at the highest
temperature without laundry. This removes all pos-
sible dirt from the drum and the tub.
Daily use
1. Open the water tap.
2. Connect the mains plug to the mains socket.
3. Put the laundry in the appliance.
4. Use the correct quantity of detergent and additives.
5. Set and start the correct programme for the type of
laundry and soil.
Loading the laundry
1. Open the appliance door.
2. Put the laundry in the drum, one item at a time.
Shake the items before you put them in the ap-
pliance. Make sure not to put too much laundry
in the drum.
3. Close the door.
Caution! Make
sure that no laundry
stays between the seal
and the door. There is a
risk of water leakage or
damage to the laundry.
11
