Determines the ACPI suspend type. Options are S3 (default) and S1.
Allows a PCI device to wake up the computer. The options are Enabled (default) and Disabled.
Determines what state the computer enters when AC power is restored after a power loss. Settings are as follows:
l Last State
Computer returns to the state it was in when power was lost.
l Off (default)
Computer stays off when power is restored; you must press the power button to turn on the computer.
l On
Computer turns on when power is restored.
Enabled (default) displays the DELL logo during POST. Disabled displays the normal POST messages.
When set to Enabled, this option shortens POST by eliminating some tests. If set to Disabled (default), all POST
tests occur.
1st Boot Device through 4th Boot
Device
Sets the boot device sequence. Only the bootable devices that are connected to the computer are listed as options.
Sets the hard drive boot priority. Options are Pri.M (device name) (default) and Bootable Add-in Cards.
