Peripheral Configuration Submenu
IDE Configuration Submenu
Sets the USB controller to either Enabled (default) or Disabled.
Set to Disabled if legacy USB support is not desired. Enabled (default) allows support for legacy USB.
Sets the integrated audio controller to either Enabled (default) or Disabled.
Sets the integrated serial port setting to Auto, (default) 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, 3F8/IRQ4, or Disabled.
Sets the integrated parallel port setting to Auto, (default) 3BC/IRQ7, 278/IRQ5, 378/IRQ7, or Disabled.
Sets the integrated parallel port mode to Bi-directional (default), Output Only, ECP, or EPP.
If the Parallel Port Mode option is set to ECP, this setting selects the ECP DMA mode. The options are 3 (default) and 1.
Configures the integrated primary IDE controller as either Enabled (default) or Disabled.
Configures the integrated secondary IDE controller as either Enabled (default) or Disabled.
Identifies the first drive attached to the primary IDE interface, usually the boot hard drive. See "IDE Primary Master Submenu."
Identifies the second drive attached to the primary IDE interface, usually a second hard drive. The format of this submenu is the same
as the one described in "IDE Primary Master Submenu."
Identifies the first drive attached to the secondary IDE interface, if there is one. The format of this submenu is the same as the one
described in "IDE Primary Master Submenu."
Identifies the first drive attached to the secondary IDE interface, if there is one. The format of this submenu is the same as the one
described in "IDE Primary Master Submenu."
