Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 10 of 12
Table 4 Voice Interface Cards for Use with the Voice/Fax Network Modules
Module Description
VIC-2FXS Two-port FXS voice/fax interface card for voice/fax network module
VIC-2FXO-M1
1
Two-port FXO voice/fax interface card for voice/fax network module with Caller ID and supervisory
disconnect (North American version and other countries)
VIC-2FXO Two-port FXO voice/fax interface card for voice/fax network module
VIC-2FXO-EU Two-port FXO voice/fax interface card for Europe
VIC-2FXO-M3 Two-port FXO voice/fax interface card for Australia
VIC-2E/M Two-port E&M voice/fax interface card for voice/fax network module
VIC-2BRI-NT/TE-TE
2
Two-port BRI NT/TE VIC interface providing configurable phantom –48VDC power, delivering 4
bearer channels of voice
VIC-2BRI-S/T-TE
3
Two-port BRI S/T terminal equipment voice/fax interface card for voice/fax network module
1. Supported with Cisco IOS 12.1(2)XH or later.
2. Supported starting with Cisco IOS Plus 12.1(3)XI.
3. Supported on the Cisco 261x with Cisco IOS 12.0(2)XD and Cisco 262x on 12.0(3)T or later.
Table 5 Cisco 2600 Series Supported Multiflex Voice/WAN Interface Cards for Use with Voice/Fax Network Module and as a
Standalone WAN Interface Card
Module Description
VWIC-1MFT-T1
1
One-port T1/Fractional T1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-T1
1
Dual-port T1/Fractional T1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-T1-DI
1
Dual-port T1/Fractional T1 Multiflex Trunk with CSU/DSU and Drop & Insert
VWIC-1MFT-E1
1
One-port E1/Fractional E1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-E1
1
Dual-port E1/Fractional E1 Multiflex Trunk with CSU/DSU
VWIC-2MFT-E1-DI
1
Dual-port E1/Fractional E1 Multiflex Trunk with CSU/DSU and Drop & Insert
1. Supported on the Cisco IOS version 12.0(5)XK or later. IOS version 12.07T required to support both the Multiflex Voice/WAN interface card and the ATM IMA
network modules in the same Cisco 2600 chassis.
