Cisco Systems, Inc.
All contents are Copyright © 1992–2001 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 7 of 12
• Weight (min): 8.85 lb (4.02 kg)
• Weight (max): 10.25 lb (4.66 kg)
• Power Dissipation: 72W (maximum)
• AC Input Voltage: 100 to 240 VAC
• Frequency: 47 to 64 Hz
• AC Input Current: 1.5 amps
• DC Input Voltage: -38V to -60V (UL label)
• DC Input Current: 2 amps
• Operating Temperature: 32 to 104 F (0 to 40 C)
• Non-operating Temperature: -13 to 158 F
(-25 to 70 C)
• Relative Humidity: 5 to 95% non-condensing
• Noise Level (min): 38-dbA
• Noise Level (max): 42-dbA
NEBS Compliance
The optionalNEBSLevel 3/ETSI kit ensuresaCisco 2600
modular access platform meets NEBS Level 3/ETSI
standards for networking equipment usually found in the
central office. This kit is available for the Cisco 261x and
Cisco 262x Series as a spare (ACS-2600NEBS/ETSI=).
This kit also includes the 23/24 inch rack mount kit for
Hendry Bays. This kit is included with the Cisco 265x-DC
Series.
Regulatory Compliance
The Cisco 2600-DC module access platform conforms to
a number of safety, EMI, immunity and network
homologation standards. Details of the regulatory
specifications are included at http://www.cisco.com/
kobayashi/Support_root.shtml.
Year 2000 Compliance
For detailed Year 2000 compliance information on the
Cisco 2600 Series, reference Cisco’s Year 2000
Compliance Web site at http://www.cisco.com/warp/
customer/752/2000/.
WAN Interface Card Options
The Cisco 2600 Series supports all WAN Interface Cards
available for the Cisco 1600, 1700 and 3600 Series, as
well as two new dual-port serial WAN interface cards to
maximize interface density and slot efficiency. The new
dual-serial port WAN interface cards featureCisco’s new,
compact, high-density Smart Serial connector to support
a wide variety of electrical interfaces when used with the
appropriate transition cable.
Figure 3 Dual-Port High-Speed Serial WIC (up to 2 Mbps/
Port)
Figure 4 Dual-Port Async/Sync Serial WIC (up to 128 Kbps/
Port)
Network Module Options
The Cisco 2600 Series supports the Network Modules
listed in Table 3; these modules are shared with the Cisco
3600 Series.
Table 2 WAN Interface Cards and Voice Interface Cards for
Cisco 2600 Series
Part Number Description
WIC-1DSU-T1 T1/Fractional T1 CSU/DSU (requires IOS
software version 11.3(4)T or later)
WIC-1DSU-56K4 One-port four-wire 56/64-kbps CSU/DSU
WIC-1T One-port high-speed serial
WIC-2T Dual high-speed serial
WIC-2A/S Two-port async/sync serial
WIC-1B-S/T One-port ISDN BRI
WIC-1B-U One-port ISDN BRI with NT
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2T
H11496
Serial ports
CONN LEDs
SEE MANUAL BEFORE INSTALLATION
SERIAL 1
SERIAL 0
CONN
CONN
WIC
2A/S
H11497
Serial ports
CONN LEDs
