24
Setup Guide
7. Set the following options in the AppleTalk Configuration
dialog box:
◗
Available Zone
Select the network zone where you want the printer to
appear.
◗
Printer name
You can use your printer’s default name or change it. If
you have more than one printer of the same type on
your network, be sure to give them unique names.
◗
Entity Type
EPSON Net! shows the printer’s Entity type on an
AppleTalk network. You don’t have to set these
options.
8. Click
OK to send the new settings to the printer and return
to the Summary dialog box. Click
Update
to send the new
settings without closing the Configuration dialog box.
9. Click Exit
.
You now need to install your printer driver and select your
printer in the Chooser. See page 28 for instructions.
Installing the EPSON Status
Monitor 2 Utility
Before you start, turn off all other active applications (such as
virus protection).
If you’re using Windows NT, you need to log on as
Administrator.
1. Insert the setup disk 1 of EPSON Status Monitor 2 in your
diskette drive.
2. In Windows 95 or Windows NT 4.x, click
Start
and
Run
.
Caution:
Once you make changes
to the Ethernet card,
wait for at least five
minutes before turning
off or restarting your
printer.
QuikSet2.fm Page 24 Wednesday, October 15, 1997 3:49 PM
