27
Setup Guide
3. If you inserted the CD-ROM and Windows starts the
installation program automatically, go to step 4.
If it doesn’t start automatically (or if you’re using Windows
NT 3.5x), click
Start
, select
Run
, and type
D:\Setup
(substitute the correct drive letter if necessary). Then click
OK. Go to step 4.
If you’re installing from diskettes, click
Start, select Run,
and type
A:\Setup
(substitute the correct drive letter if
necessary). Then click
OK
and go to step 5.
4. At the EPSON Setup CD window, make sure
Complete
Installation
is selected and click Next.
5. Select
EPSON Stylus COLOR 800
in the Printer Model
tab and click
OK.
6. Follow the instructions on the screen to install the software.
After you install the printer driver, you need to set up your port,
following the instructions below.
Changing Your Port Setting
The installation program for your printer driver automatically
sets your printer on LPT1. In Windows NT 4.x, make sure the
TCP/IP Print server service is running before you start. Then
follow these steps change to the correct port under Windows 95
or Windows NT 4.x:
1. Click
Start
,
Settings
,
Printers
.
2. Highlight the EPSON Stylus COLOR 800 printer and
right-click the icon.
3. Select
Properties
.
4. In Windows 95, click the
Details
tab.
In Windows 4.x, click the
Ports tab.
QuikSet2.fm Page 27 Wednesday, October 15, 1997 3:49 PM
