Installation
Mounting the camera
Wall mount (optional)
① Place the cover adaptor between the wall mount
bracket and the mount adaptor. Then assemble the
mount adaptor with the wall mount adaptor with 3
screws(M5 x 15).
② Hook up “Drop Prevention Spring” on main body
to prevent camera from unexpected drop and pull the
wire(s) and cable(s) for the system as below.
③ Align the arrow stud of the main body with the
arrow stud of the cover adaptor and slightly push the
main body to the mount adaptor. Then turn the main
body clockwise and assemble the main body with the
mount adaptor with 3 screws(SAMS M3x10). And align
the arrow stud of the cover adaptor with the arrow
stud of the main body and turn the cover adaptor
counterclockwise.
④ Remove the sticker and Zoom module cap. Screw
the dome cover to the main body and remove the
protection vinyl from the dome cover.
Notice
Before starting the installation, make sure that the
Camera ID and Protocol are set up properly.
