Installation
The camera ID range is 1~255. Camera ID must not
be 0.
Factory default of Camera ID is 1.
Match the camera ID with Cam ID setting of your DVR
or Controller to control the camera.
Protocol and baud rate settings
Select the appropriate Protocol with DIP switch
combination.
If you want to control using DVR or P/T controller,
their protocol must
be identical to camera. Otherwise, you can not control
the camera.
Adjust the DIP switch after turning off the camera. If
you changed the camera protocol by changing the
DIP switch, the change will be effective after you
reboot the camera.
Factory default of protocol is “LG Multix, 9600 bps”.
