AVERATEC Brand's Products

GoStudio

Table of Contents SECTIONS 1 2 3 4 5 6

OVERVIEW

Input/Output Description

3.5mm Stereo Jack

The 3.5mm jack that sits between the combo jacks can be used to

connect microphones or line-level audio sources.

TheGoStudioprovides“plug-inpower”forsmallelectretcondenser

microphones(ECMs),suchaslapelmicsanddesktop-computermics.

Some examples of line-level audio sources are MP3 players, guitar-

amp simulators, microphone preamplifiers, and laptop computers.

HeadphoneOutput

The headphone connection can be used to connect headphones

that have a 3.5mm jack, such as your iPod earbuds. The audio heard

through the headphone output will either be the audio signal that the

GoStudio is capturing or the audio from your iPod when playing back

an audio file.

You can also use the headphone output as a line output to connect the

GoStudio to another audio device with a line-level input. In this case,

you may need to turn up the monitor volume control (see the GoStudio

Controlstablebelow).

Note that the GoStudio’s speaker is disabled when headphones are

connected(seebelow).