o CONFIGURATION DIP SWITCHES
Configuration DIP switches provide variations in the ways
the printer may be operated. For additional information
on switch settings, refer to the
Peripheral Interface Guide
.
Materials Required
Jeweler's flatblade screwdriver
Setting the
1.
Make sure the power is off.
Switches
2. Remove the paper cover.
FIGURE 6
3.
Slide the carrier all the way to the right
(Figure 6, #1).
4.
Locate switches SW 1 and SW 2 (Figure 6, #2).
Note
:
SW 2-5 and SW 2-6 are used only when
performing the firing hammer adjustment (refer to
Section 4, Adjustments).
ImageWriter II rev. Aug 87
Basics / 1.
9
