ILLUSTRATION NOT AVAILABLE
FIGURE 2
4.
Lift up the clamps on both forms tractors (Figure 2, #1).
5.
Make sure that the left forms tractor is positioned all
the way to the left. (To move the forms tractor, pull the
tractor release lever [Figure 2, #2] forward.) Lock the
forms tractor in place by pushing back the tractor
-
release lever.
6.
Place the paper over the forms tractor pins. If the
paper doesn't line up with the pins, move the right
forms tractor until it does. Lock the right forms tractor
in place.
7.
Push down the clamps on both of the forms tractors.
8.
Turn the platen knob until the paper comes through.
9.
Put the back cover on.
Remove Paper
1.
Make sure the power is off.
2.
Check to be sure the release lever is set to tractor
feed.
3.
Turn the platen knob and back the paper out.
ImageWriter II rev. Aug 87
Basics / 1.
5
