Replace 1. Place the top cover upside down.
2. Connect the power button and spring
(Figure 2,
#2) by placing the coiled half of the spring over the
outer-corner screw mount, and over the button in the
top opening on the cover.
3.
Plug the cable into the operation panel
(Figure 2, #3).
4.
Line up the screw mounts with the holes on the panel,
switch side down.
5.
Replace the four screws (Figure 2, #1).
6. Replace the top cover.
7. Replace the paper cover.
8.
Perform the self-test.
2.6 / Take-Apart rev. Aug 87 ImageWriter II
