96.11.13.15.58
Color LaserWriter 12/660 PS 3–4
2 Open the fuser assembly and remove the oil absorption sheet
from the inside of the fuser assembly.
I/O Controller Board
Changes
The Color LaserWriter 12/660 PS comes standard with 16 MB
of DRAM and version 2.0 of ROM. All other characteristics of
the board remain the same.
Note
: Version 2.0 of ROM contains fixes for variety of system
and networking bugs that have been reported since the release
of the original printer. (I/O controllers with 2.0 ROM will also
output new startup and demo pages). If you want to upgrade an
existing printer, see “Upgrade Path” later in this chapter.
Driver Software
The new version of the Color LaserWriter printer does not
require a driver upgrade. However, the printer name has
changed in ROM. Consequently, with older drivers you must
manually select the “LaserWriter Color 12/600 PS” PPD when
setting up the new printer in the Chooser.
Alternately, if copy the new “LaserWriter Color 12/660 PS”
PPD into the Printer Descriptions folder (path: System
Folder:Extensions folder), Chooser setup will be automatic.
This PPD can be found on the Service Source CD (path:
Service Manuals:Clips:CLW 12/660 PPD).
