Options and settings (not all options are provided on all machines):

Settings are shown on the display or on LED’s alongside the respective buttons. The machine remembers

the settings and options you make for each program and start from them (with one or two exceptions –

temperatures over 60°C and delayed start) next time you select the program concerned.

Temperature 30-95°C or C

For certain programs it is not possible to select a temperature higher than 40°C, (see program table).

( when setting for Fahrenheit) means that the washing temperature will be equal to the temperature

of the incoming water.

Spin 400-1600 rpm. No spin ( ) or No drain ( ).

For certain programs it is not possible to select a speed higher than 800 rpm, see the table.

Speed 400-800 rpm means short spin.

Speed 1000-1600 rpm always means long final spin.

Delayed start (1-24 hours)

means that the option has been switched off and the program will start immediately as usual.

Super rinse

Super rinse means that extra rinses are added to the program (see program table).

E2 Economy and efficiency

The option means that the main wash is extended by 22 minutes. E2 can only be used on Heavy wash,

Normal wash and Light wash.

High water level

High water level means that an extra amount of water is used in the main wash and rinses. This option

may be used for all wash programs except Wool wash and Hand wash. These programs always have

high water level.

Pre-soak

Pre-soak means that the wash is left to soak two hours before the program starts.

Anti-crease

Anti-crease means that the machine rotates the drum one or two seconds per minute for two hours after

the end of the program. Anti-crease does not operate together with No spin and No spin/No drain.