15
Notes
1. The oven will enter stand-by mode
after the last operation has completed.
When in stand-by mode, the brightness
of the display will be reduced.
2. When in stand-by mode, it is necessary
to open and close the oven door
before operating the oven.
3. If an operation is set and Start is
not touched within 6 minutes, the
oven will automatically cancel the
operation. The display will revert
back to colon or clock mode.
1. Display window
2. Slider bar (plus/minus)
Select the time or weight by tapping “+”/“-” or
by swiping the slider bar. Maximum cooking
time is 9 hours.
3. Steam
6. Grill
7. Timer/Clock
8. Turbo-cook
9. Turbo defrost
10. Auto sensor programs
11. Auto steam programs
12. Stop/Cancel:
Before cooking:
One touch clears your instructions
During cooking:
One touch temporarily stops the cooking
program. Another touch cancels all
your instructions and the time of day will
appear in the display.
13. Start
Touch to start operating the oven. If during
cooking the door is opened or Stop/Cancel is
touched once, Start has to be touched again
to continue cooking.
This oven is equipped with an energy saving
function.
Beep sound
A beep sounds when a key is touched.
If this beep does not sound, the setting
is incorrect. When the oven changes
from one function to another, two beeps
sound.
After the completion of the preheating
on GRILL, CONVECTION, or
COMBINATION mode, three beeps
sound. After completion of cooking, the
oven will beep 5 times.
Control panel NN-CS894S
3
6
9
4
7
10
13
12
2
11
1
8
5
