3 POSITION POWER SWITCH:
When using this 3 position switch manually (without footswitch,) and the toggle is set in the
up position, the REVOLVER will be in its fast mode of operation. With the toggle set in its lower position, the REVOLVER will be
set to run in its slow mode of operation. With the toggle set to its middle position the
unit is switched to off.
NOTE: The 3 position power switch on the REVOLVER’S Front Panel must be in
the SLOW or (down position) for either the Footswitch or the Continuous Control
Pedal to function.
SLOW SPEED FINE TUNE CONTROL:
The function of this control is for fine tuning the REVOLVERS’ rotational speed
when it is in its slow mode of operation. It enables you to achieve preset effects ranging from extremely slow chorusing to fast vibrato.
This controls’ function is very useful when it comes to matching a songs tempo.
This is where the REVOLVER’S 1/4" Stereo footswitch cable plugs into the unit. (This jack is NOT
to be confused with the speaker jack on the Rear Panel.)
PAGE 2
FRONT PANEL FUNCTIONS:
SLOW FINE TUNE
OOGIE
B
M
ESA
REVOLVER
R
FAST
SLOW
OFF
FOOTSWITCH
CONTINUOUS
CONTROL
SLOW FINE TUNE
OOGIE
B
M
ESA
REVOLVER
R
FAST
SLOW
OFF
FOOTSWITCH
CONTINUOUS
CONTROL
R
SLOW FINE TUNE
REVOLVER
FOOTSWITCH
CONTINUOUS
CONTROL
FAST
SLOW
OFF
OOGIE
B
M
ESA
