Problem Cause/solution
I cannot register a handset to a
h
ub.
R The maximum number of handsets (6) is already
registered to the hub. Cancel unused handset
registrations from the hub (page 28).
Battery recharge
Problem Cause/solution
The handset beeps and/or
blinks.
R B
attery charge is low. Fully charge the batteries (page 9).
I fully charged the batteries, but
–
still blinks,
– is displayed, or
–
the operating time seems to
be shorter.
R C
lean the battery ends (
, ) and the charge contacts
w
ith a dry cloth and charge again.
R It is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R T
he handset is too far from the hub. Move closer.
R The hub’s AC adaptor is not properly connected.
Reconnect AC adaptor to the hub.
R The handset is not registered to the hub. Register it
(page 28).
Noise is heard, sound cuts in
a
nd out.
R You are using the handset or hub in an area with high
electrical interference. Re-position the hub and use the
handset away from sources of interference.
R Move closer to the hub.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the hub and the
telephone line jack. Contact your DSL/ADSL provider for
details.
The handset does not ring. R T
he ringer volume is turned off. Adjust the ringer volume
(page 13, 24).
R Silent mode is turned on. Turn it off (page 26).
I cannot make a call. R T
he dialing mode may be set incorrectly. Change the
setting (page 12).
I cannot make long distance
c
alls.
R Make sure that you have long distance service.
For assistance, please visit http://shop.panasonic.com/support
45
Useful Information
