31
3.8 DIN-rail Mounting Setup
Please follow the below steps to mount the UNO-1170A/AE on the DIN-
Rail.
1. Screw the provided DIN-Rail Kit on the rear side of UNO-1170A/
AE as the diagram shown below.
2. Hang the UNO-1170A/AE to the DIN-Rail with angle of inclina-
tion about 30 degree.
3. Let UNO-1170A/AE down straight to slide over the Rail smoothly.
Note: To get the UNO-1170A/AE down from the Rail, push the
device top to down then pull the bottom of the device to
let it off the Rail smoothly.
