29
3.6 Hard Drive installation
The procedure for installing a hard drive into the UNO-1170A/AE is shown as
following step.
1. Remove the power.
2. Unscrew four screws from UNO-1170A/AE indicated below.
3. Remove the side cover. Please refer to Section 3.1 & 3.2 for the
instruction to open the cover.
4. Connect the SATA cable and SATA power cable. Make sure the
cable will not lose. Use the screws in accessory to mount the hard
drive on the hard drive bracket. (Note: SATA cable is already
installed in the device)
SATA Power Cable PN: 1700006492
SATA Cable PN: 1700017959
