UNO-1170A/AE User Manual 30
5. Connect the other end of SATA power cable on the board which the
arrow indicated in below picture.
6. Screw the side cover and the four screws.
7. For user who tried to plug other SATA device, please note the
UNO-1170A/AE SATA power connector doesn't support 12V
power.
3.7 BIOS Setup and System Assignments
UNO-1170A/AE uses the Advantech SOM-4461 module. For UNO-
1170A/AE BIOS setup and system assignments, you can refer to SOM-
4481 and SOM-4486 “Award BIOS Setup” and Appendix A “System
Assignments”. The SOM-4461's user’s manual is in the “Manual” folder
on the CD-ROM.
Please note that you can try to “LOAD BIOS DEFAULTS” from the
BIOS Setup manual if UNO-1170A/AE does not work properly.
Note: There are switch setting about SATA hard drive below,
please refer to the section A.9 for detail. The hard drive
might not work correctly if the switch setting is incorrect
