13
KDS EZFlow 2040
Quick Operating Instructions
1) Press ON/OFF switch on the back of the pump to turn on the device.
2) Close roller clamp on set, spike and hang fluid container. Fill drip chamber to
fill line.
3) Open roller clamp to fill all the set with fluid. Close roller clamp.
4) Open door, install set. Close door. Open roller clamp.
5) Press once to enter the infusion rate setting screen, press or hold or
to set desired infusion rate. Press once to confirm the desired rate and
jump to volume setting.
6) Press or hold or to set desired volume to be infused. Press to con-
firm the setting and return to the main screen.
7) Attach the infusion set to vein-puncture device.
8) Hold to prime the infusion set.
9) Connect the vein-puncture device to the patient. Press to begin infusion.
10) To stop infusion, press
11) To restart or clear the total infused volume, press ON/OFF switch on the back of
the pump to restart the pump (minimum 3 seconds interval).
ALARMS
• To silent alarm, press
• Once Flash light and audio alarm is triggered, please note the alarm messages
and correct cause of alarm on the screen.
E
NTER
SET
ENTER
S
ET
ENTER
SET
PURGE
BOLUS
EXIT
CLEAR
START
STOP
START
STOP
