16
Washing cycle complete/removing the washing
At the end of the programme, END lights up on the programme
progress display. The door can be opened as soon as the DOOR light
goes off and the END light has come on.
1. Open the door and remove the washing.
2. Turn the programme knob to OFF.
3. Close the water tap.
4. After the wash, pull out the detergent dispenser drawer slightly to al-
low it to dry. Leave the door slightly open to air the inside of the wash-
ing machine.
If RINSE HOLD was selected:
After a rinse hold, DOOR and END light up on the programme progress
display.
The water must first be drained:
– Either turn the programme knob to OFF, then to DRAIN and press the
START/PAUSE button (the water is drained without spinning),
– or turn the programme knob to OFF and then to SPIN. Depending
upon the type of washing, reduce the spin speed if necessary and
press the START/PAUSE button (the water is drained and the washing
spun).
