15
Setting the delay timer
The DELAY TIMER button allows the start of a programme to be de-
layed.
1. Select programme.
2. Press DELAY TIMER button once, if the wash programme is to start after
6 hours. The display 6h lights up.
Press DELAY TIMER button twice, if the wash programme is to start af-
ter 3 hours. The display 3h lights up.
3 If you press the DELAY TIMER button again, the time delay is cancelled.
The display goes out.
3. To activate the time delay, press the START/PAUSE button.
Note: If a time delay of 6 hours is selected, the display 6h is lit. After
3 hours the display changes and 3h is lit. After a total of 6 hours the
wash programme then starts.
Starting a programme
1. Check that the water tap is open.
2. Press the START/PAUSE button. The programme is started or starts after
the time delay set has elapsed.
During the wash programme, the current programme step is displayed
on the programme progress display.
3 If the START/PAUSE button is pressed and the END indicator flashes 4
times, the door is not closed properly. Push the door firmly closed and
press the START/PAUSE button again.
Interrupting a programme/adding washing
Interrupting a programme
• A washing programme can be interrupted at any time by pressing the
START/PAUSE button. It is then re-started by pressing the START/
PAUSE button again.
• To stop the washing machine before the programme has ended, turn
the programme knob to OFF. Important! Be careful if there is water
in the appliance!
Adding washing
It is possible to add washing, as long as the DOOR light is not lit.
1. Press the START/PAUSE button. The door can be opened.
2. Shut door and press the START/PAUSE button again. The programme
continues.
