Setting the time
After the desired language you must set the time before the first wash. Remember to change
the setting time in accordance with daylight-savings time or solar time.
The CLOCK setting permits you to modify/set up the current time. It is important to keep
it updated as the current END Cycle Time depends on it.
To set the time press repeatedly the button 4 to select the settings menu (SETTINGS) and
confirm your choice by pressing button 5 .
With a single and short pressing of the button 4 , the hours can be adjusted.
Press the button 5 to confirm it. Repeat the previous operation for setting the minutes.
If the appliance has already been switched on once, refer to the beginning of «Personali-
zation» chapter.
Personalization
This appliance is provided with a settings menu that allows you to modify the factory
settings as you want.
When you switch on the machine, by turning the programme selector dial, press the button
4 to activate the options menu. By pressing again the same button you can move through
all the available options till when you locate the settings menu. Press the button 5 to access
in the menu. Use the button 4 again to scroll all the settings and press button 5 to confirm
your choice.
Setting the brightness
The brightness setting (BRIGHTNESS) allows you to modify the backlight intensity of the
display.
By pressing the button 4 , you can increase or decrease the brightness.
You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).
Press button 5 to confirm your choice.
Setting the contrast
The contrast setting (CONTRAST) allows you to modify the optical characteristic of the
display.
By pressing the button 4 you can increase or decrease the contrast.
You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).
Press button 5 to confirm your choice.
Setting the acoustic signal
The machine is provided with an acoustic device, which sounds in the following cases:
• at the end of the programme
• in the event of operating problems
If you wish to activate the acoustic device, press the button 4 in order to select the buzzer
menu (BUZZER). Press button 5 to confirm your choice. The line around the corresponding
symbol starts blinking in order to indicate that the regulation can be carried out.
Press again the button 4 to activate or deactivate the acoustic signal.
Then press the button 5 to confirm your choice.
10
Personalization
