The duration is calculated automatically on the basis of the maximum
recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Programme progress display
After having pressed the START/PAUSE button,
the display shows the running phase of the
washing program. On the display you can see
also the description of the selected type of
fabric, an animated bar, that indicates the
carried out cycle and the remaining one, the
duration of the washing program and the end
of cycle.
Delay start
If you have selected the DELAY START, the relevant icon appears on the right side
of the display.
After having pressed the START/PAUSE button, the selected delay time value (max
20 hours) appears on the right side of the display, closed to the relative icon .
The delay time value decreases every minute.
Incorrect option selection
If an option, which is not compatible with
the set washing programme, is selected, the
message «Non selectable» is displayed for
some seconds.
Alarm codes
In the event of operating problems, some
alarm messages can be displayed, for
example
““CCaannnnoott ffiillll wwaatteerr.. PPlleeaassee cchheecckk tthhaatt
tthhee ttaapp iiss ooppeenn aanndd tthheenn pprreessss SSTTAARRTT//PPAAUUSSEE””
.
(see paragraph «Something not working»).
21
Use
COTTONS/LINEN 1:40
13:05
Washing
COTTONS/LINEN 40
13:05
Rinsing
COTTONS/LINEN
1:40
23:00
Not selectable
Cannot drain the water. Please check
that the filter is clean and then press
START.
132969591.qxd 18/01/2008 11.18 Pagina 21
