Locating a Track (Multi-AMS/
Auto Play/Memory Play)
You can locate the following/previous tracks (Multi-
AMS: Automatic Music Sensor) or the beginning of a
tape quickly. You can even locate a specific point
anywhere on a tape.
RESE T M EM O RY
GE3
©1$ (j)
CD O
To locate
Press
the beginning of the next
or succeeding tracks
(Multi-AMS*)
►► as many times as you
want while playing.
For example, to locate 2 tracks
« ahead,-press twice.
the beginning of the
current track (Multi-AMS*)
■« once while playing
the beginning of the
preceding tracks
(Multi-AMS*)
as many times as you
want while playing.
For example, to locate 2 tracks
behind, press three times.
the beginning of a tape
(Auto Play)
MEMORY repeatedly until
"M" disappears in the
display. Then press
while holding down O.
a particular point on a
tape (Memory Play)
MEMORY repeatedly until
"M" appears in the display.
Find the point you want, and
press RESET to reset the tape
counter and to memorize the
point.
To locate the memorized
point, press while
holding down O. (Press
only to stop at "00 00.")
What happens during Multi-AMS operation
when Multi-AMS is operating, "PLAY" appears. And each
time the deck detects a blank space, the indicated number
decreases by one. After locating the beginning of the
specified track, the counter indication appears again and the
deck starts playing the track.
^ : Beginning of track
^ [.?] ^ [;]
[.f]
I III II 1
Previous
track
Current
track
Next
track
Notes
• The Multi-AMS function may not work correctly if:
— the blank space between tracks is less than 4 seconds
long.
— the signal strength of the left and right channels are
very different.
— there is a passage of low frequencies or very low
volume within a track.
• Since the counter is not a digital clock, it will differ from
the actual elapsed playback or recording time.
You can use the Multi-AMS to locate up to the 30th track
after or before the current track.
