Playing a Tape
2
• See page 4 for hookup
information.
^ To play a tape recorded
with the Dolby NR*
system
Turn DOLBY NR to the same
Dolby system that the tape
was recorded in—B, C, or S
(TC-KE400S only).
Please note that the B, C and
S settings on both sides are
identical during playback
since the MPX filter operates
only during recording
(unavailable on the TC-
KR200).
Q You can connect the
headphones to PHONES.
Dt'lbv noise reductioit
manutactured under license from
Dolby Laboratcirios Licensing
C.'c>rpi'i'ation
"OOl.BY" and the double-D
symbol □□ are trademarks of
Dolby l.aboratories Licensing
CorptMation.
1
Turn on the amplifier and select the tape deck position.
2
Press POWER, and then press ^ EJECT.
Insert a cassette and close the cassette holder.
The tape type (1, II, or IV) appears in the display
With the side you want to play
taring you
^ Press O.
The deck starts playing.
Adjust the volume on the amplifier.
Do not press POWER or ^ EJECT while the tape deck is
operating. If you do so, the tape may be damaged.
To
Press
Stop playmg
■
Pause
II PAUSE. Press the button again to
resume play.
Fast-forward or rewind ►► or MM when the deck is stopped
Take out the cassette ^ EJECT after stopping playing
(V'“
