Product description
4
4 Product description
4.1 Mode of operation
The boiler and the tank fill and are warmed up to the operating temperature after the machine is switched on.
During the heating phase, the lighting of the start button (3) changes gradually from red to green. When the
target temperatures are reached, the machine is ready for use. The start button lights up green.
The machine is fully automatic with programmes consisting of three steps: Wash, Drain and Rinse. Whilst a
washing programme is running, the start button gradually moves from blue to green.
4.2 Special equipment
The following special equipment is available:
Cool (only for glass washers)
The rinsing power of the constant hot tank water guarantees hygienically clean results. At the end of the
wash cycle the rinse with cold fresh water ensures the cooling of the glasses.
A special plus: the rinse temperature can be increased at any time. So, you can decide at any time
whether you need cold glasses or to optimise the drying with a hot rinse cycle.
IMPORTANT The first rinses after activating this function will still be with hot or warm rinse water.
Requirement: Connect the machine to the cold water.
effect
In this process, you rinse with reduced tank and boiler temperatures. Appropriate Winterhalter detergents
and rinse aids are required for rinsing at these temperatures with this process.
Due to the reduced tank and boiler temperatures you save energy and thus operating costs. At the same
time the kitchen climate sustainably improves because when you open the hood there are less vapours
from the machine. This function can be deactivated at any time.
Requirement: Connection of the machine to water at a maximum 50 °C when the glasswasher is operat-
ed.
EnergyPlus
In the construction above the machine there is a fan motor and a heat exchanger. After rinsing, the fan
motor draws the humid vapours (= exhaust air) out of the washing tank through the heat exchanger. The
cold fresh water flowing through the heat exchanger condenses the vapours and is preheated for the rins-
ing of the next washing programme. Less energy is therefore required to heat the fresh water to the rec-
ommended rinse temperature. A waste water heat exchanger provides an additional energy gain. This
system also sustainably improves the kitchen climate because when you open the hood there are less
vapours from the machine.
Requirement: Connect the machine to the cold water.
Automatic hood opening
The hood opens automatically after each wash cycle.
Integral softener ( 6)
