10 89007312
Adding regenerating salt *:
* Only for machines with an integral water softener
The salt container inside the machine must be filled with regenerating salt when the
symbol lights up on the operating panel
3
.
You can do this while the machine is on: you do not have to switch off the machine or
drain the water.
The symbol goes out at the latest after the third cycle.
Open the screw cap of the salt container and fill the salt container up to the rim with
fresh water (only necessary the first time the machine is used). Place the funnel in the
charging hole and pour in 3 bags of Winter-halter special salt (=1.5kg).
Remove the funnel and clean the filling area from salt residues.
Screw the cap back on the salt container tightly without tilting it.
Then perform a washing program immediately to flush out any salt residues. Otherwise
there is a risk of rust forming in the filling area.
Only add regenerating salt to the salt tank!
The salt used should be very fine (max. grain size 5 – 7 mm). Salt tablets are not
suitable.
Do not add any other chemicals, such as detergent or rinse aid. These will cause
damage to the machine.
3
Note:
If the machine does not have an integral water softener and this symbol lights up, the connected external
water treatment system is exhausted and must be regenerated. Follow the instructions in the documentation
supplied with the water treatment system.
