The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more int ensive prog ramme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the item s so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishw asher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barely war m to the touch. Empty the low
basket fir st. This prevents water form dropping off
dishes in the upper basket.
In short program the washing t emperature is lower.
This also lowers cleaning performance. Choose
a progra m with a long washing time.
Water drainage is more d ifficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
not powerful enough.
Not eno ugh deter gent
was dispen sed.
Items are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp a y arm jets
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are r emoved
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Tap is not opened, or water intake is restricted,or water pressure
is too low .
Some element of dishwasher leaks.
Longer inlet time.
Overfilled.
When some malfunctions come on, the appliance will display error codes to warn you:
If overflow o ccurs, turn off the main water supply before calling a service .
If there is water in the base pan because of an overfill or small leak,
the w ater should be removed before restarting the dis hwasher.
The light flicker fleetlyrapid
The light flicker fleetlyEco
