TO ASSEMBLE CLEANER
A
WARNING
Electrical Shock Hazard.
DO NOT plug Into electrical supply until assembly is complete. Falluie to do so
could result In electrical shock or injury.
.VACUUM
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has been
installed for shipping purposes.
Please remove the screw
before inserting the handle.
Insert the handle as
shown In the illustration.
Make sure the ON/OFF
switch is in the OFF
position before
instaliing.
2. Insert the screw Uiat
you have removed.
Be sure the screw is il
tightened, but not
overtightened.
Remove screw for the
hose holder. Rotate
and align hose holder
hole with screw hole
in handle and insert
screw.
j / Hose
Holder
- Hose
Holder
Screw
Handle
Screw
3. There are two (2) recessed areas
located on the back of the vacuum,
as shown in the illustration,
designed to secure the power
cord during vacuuming.
.. Power
Always push the power cord _
down into these recessed
areas to help keep the power cord
from hanging near the nozzle
1
and being damaged by the agi- ^
tator.
_____________________
[ti
4. Loosely wrap the power cord
around the quick release cord
hook and the lower cord retain
er. Secure the plug head to
the cord by pushing the power
cord into the retainer on the
plug head.
Retainer —
(Plug Head)
1. The upper cord hook has a ^
quick-release action. To jfn
release the power cord, J 1
rotate the hook downward / W
and the complete power cord L f corrf
will drop off the hook for Hook
immediate use.
2. DO NOT unplug the power X
cord by pulling on the cord. p
Grasp the plug head and pull to S
unplug.the vacuum cleaner.
Return ttie hook to the upright
position before attempting to
rewind the cord.
-6-
