REMOVE THE FOLLOWING:
REMOVE DASH PAD, INSTRUMENT PANEL, PASSENGER SIDE PANEL AND LOWER PASSENGER SIDE
DASHBOARD (RETAIN SCREWS) SEE FIGURE 2.
GLOVE BOX (RETAIN) SEE FIGURE 2.
AC/HEATER/EVAPORATOR ASSEMBLY AND ALL RELATED DUCTING (DISCARD), RETAIN SCREWS.
SEE FIGURE 3.
CONTROL PANEL ASSEMBLY (RETAIN CONTROL PANEL) SEE FIGURE 2.
REFER TO CONTROL PANEL CONVERSION KIT INSTRUCTIONS FOR INSTALLATION OF CONTROLS.
REMOVE OEM DEFROST DUCT ASM SEE FIGURE 3.
NOTE: REMOVAL OF DASHBOARD REQUIRED TO INSTALL THE EVAPORATOR. VINTAGE AIR
RECOMMENDS THAT YOU UTILIZE THE FACTORY SERVICE MANUAL WHEN YOU DISASSEMBLE
AND REASSEMBLE THE DASHBOARD.
PASSENGER COMPARTMENT
GLOVE
BOX
PASSENGER SIDE
PANEL
LOWER PASSENGER
SIDE DASHBOARD
DASH PAD
7
1969-70 MUSTANG w/ AC GEN IV
CONTROL
PANEL
INSTRUMENT
PANEL
AC/HEATER ASSEMBLY
& RELATED DUCTING
OEM CENTER
LOUVER
OEM
DRIVER SIDE
LOUVER
DEFROST DUCT
ASM
OEM
PASSENGER SIDE
LOUVER
FIGURE 3
FIGURE 2
904069 REV A 1/30/08, 69-70 MUSTANG w/ AC GEN IV EVAP INSTR PG 7 OF 23
