24
Electrical connection
Information about the mains power supply, the
nature of the power and the fuses to be used are
given on the washing machine name plate at the
back of the washing machine.
If the washing machine is directly connected to the
electrical installation (fixed connection), insert a
two-pole switch with a contact opening distance of
not less than 3 mm.
This washing machine can only be connected to
220-230 V single phase power supply.
Check that the subscriber’s meter and fuses are
capable of carrying the current required by the
washing machine, allowing for other electrical
equipment connected at the same time.
Rating of line fuses (one for each phase):
10 A in 220-230 V single phase.
Important
The installation shall comply with with the
rules in force.
Use a power outlet with an earthing pin, which
shall be connected according to the rules in
force.
If the mains power supply cable has to be re-
placed, have the work done by the After Sales
Service to make sure that it is done safely.
Make sure that the earthing connector is conform
with the rules in force.
We cannot be held responsible if accidents or
incidents are caused by a non-existent or de-
fective earth.
