After the check, turn the programme knob on the same
washing programme before the malfunction occurred.
The programme continues from the point of interrup-
tion.
If the malfunction occurs again, contact the service cen-
tre.
If the different alarm codes show, contact the service
centre.
The necessary information for the service centre is on
the rating plate.
Record this information:
– Model (MOD.) ........................................................
– Product number (PNC) ..........................................
– Serial number (S.N.) ..............................................
The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The selected washing programme
was not applicable for the type of
load and soil.
Make sure that the washing pro-
gramme is applicable for the type of
load and soil.
The baskets were not loaded cor-
rectly, water did not touch all surfa-
ces.
Load the baskets correctly.
The spray arms could not turn free-
ly because of incorrect arrange-
ment of the load.
Make sure that an incorrect ar-
rangement of the load does not
cause a blockage of the spray
arms.
The filters are dirty or not assem-
bled and installed correctly.
Make sure that the filters are clean
and correctly assembled and instal-
led.
The quantity of detergent was not
sufficient or missing.
Make sure that the quantity of de-
tergent is sufficient.
Limescale particles on the dishes. The salt container is empty. Fill the salt container with dishwash-
er salt.
Incorrect water softener adjustment Adjust the water softener.
The salt container cap is not closed
correctly.
Make sure that the salt container
cap is closed correctly.
There are streaks, milky stains, or a
bluish layer on glasses and dishes.
Rinse aid dosage is too high. Decrease the rinse aid dosage.
Dry water drop stains on glasses
and dishes.
Rinse aid dosage is too low. Increase the rinse aid dosage.
The detergent can be the cause. Use a different brand of detergent.
The dishes are wet. You have set a washing pro-
gramme without drying phase or
with a decreased drying phase.
Let the door stay ajar for some mi-
nutes before you remove the
dishes.
The dishes are wet and dull. The rinse aid dispenser is empty. Fill the rinse aid dispenser with
rinse aid.
27
