3. For better drying results, keep the door ajar for
some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily dam-
aged.
• First remove the items from the lower basket, then
from the upper basket.
• There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
Care and cleaning
To remove and clean the filters
Dirty filters decrease the washing results.
1
2
Clean the filters below
running water.
3
To remove filters B and
C, turn the handle ap-
proximately 1/4 counter-
clockwise .
4
Remove the flat filter A
from the bottom of the
appliance.
5
Put the flat filter A in the
bottom of the appliance.
Install the flat filter cor-
rectly under the two
guides D.
6
Put the filter system in
position. To lock the filter
system, turn the handle
clockwise until it locks in
position.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and con-
trol panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads
or solvents (acetone).
What to do if…
The start of the appliance does not occur or it stops
during operation.
First try to find a solution to the problem (refer to the
table). If not, contact the service centre.
With some malfunctions the indicators flash to
show an alarm code.
25
