8825/8830 Controller Setup Manual for Firmware 6.0 123
Configuring the Printer Processing Defaults (continued)
Label Shading & Font Options
Purpose of Label Shading & Font Options
The Label Shading option sets the default shading of the label in percent.
Range: 0 - 100%
Default: 100
The Font option sets the default font to be used in the label string.
Range: All the Xerox supplied fonts
Default: OCRB
PATH TO THE LABEL SHADING & FONT OPTIONS
Display <IDLE>, press [ON-LINE], display <PAUSED>, press [ENTER],
display <UTILITIES>, pr
ess [NEX
T] until <PRO
CESSING DEFAULT
S> is
displayed, press [ENTER], display <ELECTRONIC COLLATION>, press
[NEXT] until <LABEL> is displayed, press ENTER, press NEXT until <LABEL
SHADING> or <FONT> is displayed.
SELECTING THE LABEL SHADING & FONT OPTIONS
Press the ENTER key to change the option. If <LABEL SHADING> is
selected, use the Keypad to input desired percent. Press ENTER to confirm.
If <FONT> is selected, use the NEXT key to choose a font and press ENTER
to confirm.
EXITING THE LABEL SHADING & FONT OPTIONS
Press EXIT to set up additional functions. Press the ON-LINE key to go back
to ON-LINE mode.
