Dil ID: 6
Dil Adı: turkish
Dil Kodu: tr2tayfun Whirlpool Markası'nın Ürünleri
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



GB
Quick Reference Guide
Before using the machine, please also read the Instructions For Use carefully!
5
AMB 3973
5019 607 01568
(Subject to technical modifications)
Indicator lamps
Programme selector knob
The drying programme is selected by
turning this knob. The “Start (Pause)”
indicator lamp flashes.
“Start (Pause)” button
The drying programme is started by
pressing this button. The indicator lamp
lights up.
Filter
The indicator lamp lights up when the
filter and/or the heat exchanger and its
housing need to be cleaned.
Clean the filter at the end of every drying
cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after every
drying cycle.
End
The drying programme is finished. Please
unload the dryer.
Overdry protection
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection function.
Gentle
Selecting this option will reduce the
drying temperature. This option cannot
be selected when the “Rapid” option is
selected (if available).
Anticrease
This option can be chosen to reduce
wrinkling, when the laundry is not
unloaded directly after end of the cycle.
The drum turns from time to time for
maximum 12 hours.
It can be interrupted at any time by
switching off the dryer.
This option deactivates the “Buzzer
function, if it is activated.
Start delay
Delays the start of the drying cycle by
3, 6 or 9 hours. Each time the button is
pressed the delay is increased by 3 hours.
Press the “Start (Pause)” button to
confirm the final selection and to start the
dryer. The LEDs above the programme
selector knob flash to indicate the
selected time. During the countdown, the
drum will turn from time to time to
redistribute the laundry and the pump will
start to pump water in the water
container. To cancel or change the
previously set time delay, set the index of
the programme selector knob to the
Off” position, or open the door.