3
1. Launch a Web browser. In the location or address line of your Web browser, type
http://192.168.2.1 to access the Web User Interface.
After the connection is established, you will see the Web User Interface. The default pass-
word is admin. Click Login.
When you access the Web User Interface, click the Setup Wizard.
Note: If you are prompted to connect to the Internet, you may need to select Try Again or
Connect, depending on your Internet browser.
2. Select your Time Zone and then click Next.
3. Choose your Broadband Type. (Enter the appropriate information for the type of Internet
connection you chose.) When you are finished, click Next.
4. If required, enter the IP address Info for the 802.11g 54Mbps Router and then click Finish.
After finishing the Setup Wizard, if it does not report "Connected," perform the steps of the Setup
Wizard again.
If Web User Interface still did not report “Connected,” or if at anytime you want to validate your
Internet settings, click Advanced Setup and select Status.
To make a wireless connection:
Make sure each wireless adapter that will be con-
nected to the network is set to Infrastructure mode.
If you purchased the USR5470 Wireless Starter Kit,
refer to the Navigating the Wireless Configuration
Utility section of the 802.11g 54Mbps USB Adapter
User Guide on the Installation CD-ROM to deter-
mine how to change this setting and for instruc-
tions on collecting your configuration information.
If you are connecting a different wireless adapter,
refer to that wireless adapter’s documentation.
When you are finished configuring the basic connection settings, you should now have Internet
access. Launch a Web browser and register your product at www.usr.com/productreg If the page
loads, you are finished with the installation procedure. If the page does not load, refer to the
Troubleshooting section.
