01
Load Balance Broadband Router
Chapter 1 Introduction
1.1 Product Overview
TL-R480T+ is a product designed for small business. It features three free changeable
ports that can be set to either LAN or WAN, allowing the router to support up to four
WAN ports to satisfy various Internet access requirements through one device. At the
same time, network traffic is managed to ensure that data is properly distributed to
each port. TP-LINK TL-R480T+ will provide you consistent network uptime and reliable
Ethernet connectivity.
1.2 Appearance
■
Front Panel
The front panel of TL-R480T+ is shown as the following figure.
Figure 1-1 Front Panel
LEDs
LED Status Indication
PWR
On The router is powered on
Off The router is powered off or power supply is abnormal
SYS
Flashing The router works properly
On/Off The router works improperly
Link/Act
On
(Green/Yellow)
There is a device linked to the corresponding port but
not active
(Green indicates the corresponding port is working as
a LAN port, and yellow indicates WAN port)
Flashing
(Green/Yellow)
The corresponding port is transmitting or receiving
data
(Green indicates the corresponding port is working as
a LAN port, and yellow indicates WAN port)
Off There is no device linked to the corresponding port
100Mbps
On
(Green/Yellow)
The linked device is running at 100Mbps
(Green indicates the corresponding port is working as
a LAN port, and yellow indicates WAN port)
Off
There is no device linked to the corresponding port or
the port is running at 10Mbps
Introduction
