Xerox Nuvera™ 100/120/144 Digital Production System - Customer Expectations Document
- 8 -
• Banner and slip sheets should be greater than or equal to 90 gsm (24 lb bond)
• Slip-sheets must be the same size as the body sheets
• When stapling sets with mixed size stock, the stock must be the same dimension in the Across Feed
direction, and the dimension differences should be within 13mm (½”) in the feed direction.
• Drilled paper must be loaded with the holes leading (e.g. to the left) when using two Basic Finishing
Modules.
FreeFlow
Digital Workflow Collection
•
FreeFlow
TM
Makeready, Web Services and Process Manager, versions 4.0 and higher, provide support for
the Xerox Nuvera™ 100/120 DPS; similarly, versions 5.x provide support for the Xerox Nuvera™ 144 DPS
(compatibility support is provided in versions 4.x). Customers with earlier versions of these applications may
need to upgrade since SPAR support will not be available.
New Capabilities with Xerox Nuvera™ System Release 7.0
• Single and dual BFM, or a single BFM bypass to FTM, on the 144 ppm Nuvera configuration. Use of an
insertion module is also supported in such configurations.
• Basic Finishing Module (BFM, BFM Plus) improvements
o Improved stacking quality for small sets (sets with small number of pages in a set)
• The Large Format Sheet Feed Module (comes with 2 trays) can now be used as an insertion module.
• Auto Tray Switching enhancement to match legacy DocuTech/DocuPrint behavior, where when a tray goes
empty and a switch occurs, the new tray is fed from until it needs to be re-filled, instead of only until the
previous tray has been refilled.
• Improved compatibility with legacy DocuPrint NPS products
o Emulation of the NPS Duplex activate/deactivate behavior
o The /setpapertray custom NPS operator command is now ignored; thus jobs are no longer
faulted when this command is encountered
o Addition of new 2-sided media attribute setting conflict handling choice of applying side 1
attributes to the side 2 page (existing choices include move side 2 image to next page and apply
side 2 attributes to side 1)
o NPS background forms support enhancements, enabling the choice of using legacy NPS
created forms or DocuSP forms from previous releases. Also included is an NPS form migration
capability.
o Support for resource based scheduling of jobs based on the %%DocumentMedia command,
preventing NPS jobs from running if all specified required media is not present
• LCDS support enhancements
o Inclusion of completion codes on the LCDS accounting sheet
o System Backup and Restore support for tape drives
o Support for LTO-2 tape drives
o DJDE stapling enablement for each individual report within the job
• IPDS support enhancement
o User selection of the half-tone screens available on Nuvera
o Margin settings can be set by media
• PCL support enhancement
o Support for Output Bin Selection command
• Hot Folders -
Provides a general hot folder submission mechanism for data streams (PDF, PS, PCL, TIFF,
VIPP and VIPP Projects are supported), including optional submission of XPIF job tickets.
• Addition of version control to the accounting CSV reports, such that customers can choose which version of
the “Record Layout Definition” (CSV) file format to use when exporting the accounting data
