Connecting Other Equipment
Connecting a VCR, video disc player or Camcorder not equipped with an S video output jack
: Signal flow
(Rear of projection TV)
Preparing for use
Operating the equipment
1 Turn on the projection TV.
Same as p. 15.
Press TV/VIDEO on the projection TV or on the Remote
Commander so that “VIDEO 1“VIDEO 2" or “VIDEO 3*
appears on the screen.
VIDE01 : for equipment connected to VIDEO 11N
VIDEO 2: for equipment connected to VIDEO 2 IN
VIDEO 3: for equipment connected to VIDEO 3 IN
To return to TV mode
Press TV/VIDEO or CHANNEL +/- on the projection TV,
or press TV/VIDEO, CH +/- or 0 - 9 and ENTER on the
Remote Commander so that a channel number appears
on the i
If you try to use equipment that is connected to the front and rear
VIDEO 3 IN jacks at the same time, the picture will be distorted.
Be sure you turn off one piece of equipment first,
if you have connected to a Camoorder’s input jacks, do not
connect to the prelection TVs input jacks.
You can labei each of the video input modes (p. 55).
You do not need to select a video mode when you use the direct
play function (pp. 71 - 72).
If you connect a monaural VCR, connect the audio output of the
VCR to the L (MONO) jack of VIDEO IN (1,2 or 3). The monaural
sound will be heard from both speakers.
16
Chapter t: Setting Up
